@Doug L Doug, if you decide to pass this stove on, I'm interested. I have a bunfoot #1 which lacks a burner and 1 collared leg. Sincerely,...
To answer your question about using another type of burner: since the regulator valve is on the left side of a 111C, you'd need to find a...
The screwholes in the burner look threaded; if so, graphite paste or ribbon would provide a positive, but antilock(and non permanent) seal. Yes?
It may be that a PO drilled those locations to decoke the burner legs, then filled the holes with the screws.
@sefaudi I'm so happy that you are back home.
@Naomi I would not trust the nelsonaudio o-rings. Nitrile Buna is not as fuel and heat resistant as Viton. The size(201) is also incorrect(not...
Per Naomi: A super helpful person at MSR (Cascade Designs) found the details for me: AS-568A size -008 (that's dash 008, it's the size...
It looks to me like there is no metal left on the case to encircle the hinge rod. If it were simply the tank support plate, that could be JB...
I believe the multi tool that operates the valve spindle may be used to remove the nrv.
@MarkG It makes fire really well, and looks good doing it!
Cool! It was quick, a couple of minutes and I was out of there with several spares in various finishes: black, brass, stainless steel...
@Cookie the good news is that the font screws are a common metric thread; the bad news that I don't remember the thread and pitch(I've got CRS)....
Rust-Oleum
I am a simple tool. To ensure that the replacement NRV threads are compatible with your pump tube threads, chase the NRV threads with a steel(not...
That would be the EEBSS(Extremely Effective Burner Stabilization System)
@Billyboy beautiful stove! That thin tin thing is part #1538, and is for inserting the cleaning needle(in its carrier) into the burner....
It looks like it could be a Wok stove due to the inclined pot supports; I think the fuel of choice would be Coleman fuel due to design of the...
@Stovost could the detachable canister be a spirit "pan" for priming?
@itchy There is a fine line between cynicism and realism. I think you're being realistic.
Is the inner cap in place, upside down?
Separate names with a comma.
