@hikerduane I'm not sure why I didn't post these photos here?... Maybe I did in a different post and forgot about it... But here's some...
Thank you gentlemen for the nice comments... I'm not sure why I didn't share this video of the Hotblast startup before... [MEDIA]
@Jim Lukowski I can't speak for @AGM-tyme but I as you know like building customs which would be much easier with the correct tap :content: [ATTACH]
I'm built up with torch and pitchfork in hand :D keep us updated :thumbup:
I'd say the best place to ask for interest would be at the CCF (Coleman collectors forum) fairly often members are asking and looking for a tap...
I'd definitely be interested if they don't cost more than the GPA I'm fettling :)
@AGM-tyme the fount threads on Coleman 220/228s as well as many stoves use a 32 thread per inch tap instead of 27. Altho the 1/2 - 27 is common...
Which models are you referring to? 220/228 lanterns and most 2 burner Coleman's use a proprietary 1/2 32 tapered thread. No known taps/dies I'm...
Duane I'm assuming your cups are brass? My go to on them is always a lye soak and scrub first then finish with citric acid to bring back the brass...
To avoid any confusion the 457G is a Coleman product instead of AGM. @Tony Press @Christer Carlsson
Well done!
Duane if I'm not wanting to change the patina on brass I just soak it in lye then scrub with a brass or plastic bristle brush to clean... I find...
Personally if it's rust free and clean I'd keep good clean fuel in it myself. But by far the best fount liner I have used is Caswells. In my...
Recent fettle that many of you have seen. Thought I would share it here in the reference. The legs, valve key, and heat diffuser are homemade as...
Finished the final piece to this puzzle today. Sheared out a heat diffuser. Now to cook a 5 course meal :) also pictured with other 1923 Coleman...
Thanks for a warm welcome fellas. Thanks to @hikerduane I have an oven grate and was ready to make a meal when I realized I forgot to cut out a...
@cottage hill bill after Keith's post last night I got to searching and John Stendahl mentions that these extra bungs were found only on the post...
@Majicwrench that is a factory bung with a plug in it... I've seen photos of others with the same plug... Not sure what it's purpose... This...
Back on the clunker today. Lots of heating screws and burner ring cleaning. Found a little more debris in the manifold that was causing some part...
I always wanted a 413B... But I had dreams of a nicer example :content: I find the 413 size stove ideal for my kind of cooking with a good single...
Separate names with a comma.