Looks good, can I ask what voltage you use? Is that a dual voltage charger set to 6V?
Thanks afterburner, the quality of replacement new parts can vary dramatically. Will keep looking for a replacement, would like to keep the old...
Well, after shortening the riser thread a little with no success it appears the thread is not tapered after all. It appeared to seal by the...
Screwfix sell 6mm alloy rod which is ideal, they stock other diameters as well. I made some legs for a 1 pint RM stove a few years ago and it does...
Thanks for prompt reply. I had watch the leak repeatedly and it does appear on the threads and not on the fitting in the tank, good idea though....
My reliable rm stove burner riser thread has started leaking. Normally a slight nip with the small spanner is sufficient but now a good tighten is...
My 123r of the same era displayed a unbalanced flame pattern. I gently lifted the flame plate and now it burns far better with a blue flame...
So in round figures that's 65 to 75 psi, but I need to re test the 8r srv again due to the diagram note, that stipulates the test to be done 24...
Very interesting Staffan, will have a look at these figures.
Again thanks for more replies, thanks for the information about springs and it confirms it's a black art indeed spring production. My experience...
Thanks for your reply, yes I agree the standard construction on initial assembly would be to assemble as you kindly suggest. But after a single...
Thanks, the test rig was simple and cheap. I couldn’t show the original damaged 123r tank as I had already removed the filler fitting from the...
Yes, have researched these threads and the subject of srv is ever ongoing. I work in the oil and gas industry, I work with the design and safety...
The company would have had a standard but again these are now old refurbished with third party replacement parts, so the original standard is lost...
The problem stove 123r is not made in Sweden, possibly an early Chinese or were ever version. These stoves are old and we are forced to fit third...
Yes I agree about the appearance, but the screw is secured and the operation is correct. If screwed to the normal position the srv did not open...
Thanks for your replies and if I can add the following, I originally thought that exactly reassembled srv would be sufficient, this does not...
I have adjusted the 8r srv and secured it with thread locker, resets @ 60 psi and opens @ 70 psi. Not ideal but can't back it off much more due to...
[ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH]
Well, bit of an update. Made a test rig out of a few fittings and results were as follows Svea 123r with replacement tank from fogas, set as...
Separate names with a comma.
