95 unleaded esso car fuel, as I have used in my 8r and other petrol stoves for years
Even after warming up, and new nozzle the flame had yellow tips. This was Even at low fire or simmer, the flame only blueish at high fire. Still...
While I do wish I had photos, I don't. It takes only a little imagination to visualise a concave base. Yes, it failed safe and it would have to...
No ideal of pressure, this happened while out using the stove in the field. Another thought I have is the burner was over fired and the wicks...
This stove tinkering is addictive, against all logic I have ordered another tank from fogas. Will not be using stand or windshield in the future...
It is clear now that I should of photographed the stove, it gained temperature very quickly compared to my 8r. I am slightly wary of using a 123r...
Sorry, the tank is already disposed of, otherwise I would be tempted to repair it. The top looked OK, but the bottom was completely bowed out. So...
Yes, I have read your report before, very thorough. Yes, fired or similar products have inherent hazards. These hazards are largely controlled by...
I prefer paraffin, far safer
The srv pip was replaced and carefully re assembled. I did crudely check it by depressing it after with a shank end of a drill bit, and it moved...
After using the climber era stove for a few weeks I was getting used to it. I have for last few years been using various brass paraffin stoves....
I use fibreglass gasket material. It's loosely woven and a hole can easily be made by teasing the fibres apart, the riser tube or end of burner...
I use parrafin and fiberglass wick on parrafin stoves in sub zero temperatures without any problems. On 00 and 111 stoves
A Korean seller on evil Bay sells them referance 133182500300
The o rings appear to wear or possibly shrink slightly, keeping them lubricated certainly helps. They even appeared to detirate while being stored...
The spindle o rings regularly need changing, I have wondered if the traditional graphite compression method might have worked better, this method...
I purchased an old 111 and after lining the spirit cup with ceramic tape, I found it primes ok with paraffin. Admittedly a bit smokey compared to...
Hello Gents As a long term nova user, the fine fuel hole into the burner can become obstructed and carbon cleaner followed by a gentle clear...
Credit to base camp who gave this reply Hello, thanks for the mail, the 8R key will not fit properly through the hole in the 111 case. We do have...
Nothing, but I needed a nrv tool anyway. If I hear anything I'll put it on here for information.
Separate names with a comma.
