@SveaSizzler I will be honest I don’t know how the trivet/ hot plate works but the owner had thought about how to get more heat into the metal...
I picked this set up recently it’s got a homemade tin, windshield, funnel and a hot plate. It came with several spare burner parts which was a big...
@nightsky that’s a good looking piece of kit!
@ewen lovely looking stove!
I made a penta wrench by filing down n Allen key works fine and was easy.
@Mr Robin Hodgkinson Have been branded by most parts of stoves in one way and another! The flame plates stay hot for a long time! Excellent...
Typical! I have a family wedding on the 31st May in Wales so no chance for me to get there again this year!:(:(
@Thos picture 3 that is the nipple it has a tiny hole in its centre check its clear when you remove it look to see if the orifice is clear. Or put...
@The Warrior When I make a gasket I mark the outer diameter with a biro round the punch then get the smaller punch and try and even the spacing...
@Blackdog The base was right off and part of the turned over seam on the tank (not the loose base) seemed to have been split or come adrift. As...
As I say I reckon melt down not explosion!
Google BBC Repair shop episode 6 series 14 about 38 minutes in I think? The base was completely detatched looked more like a melt down rather than...
@Robert Radcliffe I am not sure I would risk using a stove that had been that badly damaged! But great to see a stove on at last. Looked like...
Congratulations to a worthy winner!
It looks fantastic Tony!
Looks like an excellent hunting ground!
Very nice stove and tin !
@Nicola Francesco Elia I was really only interested to see if you were going to get more made? I only have one Juwel number 6 and have the BD...
@Nicola Francesco Elia Lovely stove and 3D printed burner plate. I have a Bernie Dawg one, but I like the lettering on the one you have had made,...
@Pharael very jealous of that 57! I am looking for one to be complimented by a 157r heater fitting I have.
Separate names with a comma.