Congratulations, a nice flame pattern :thumbup:
mstewart, I haven't worked on one but looking at other posts that have, you do not appear to be missing any parts. :-k Looking at the service...
Nice work, John:thumbup:. I do like the UFO flame pattern. :)
@Edwin S in this case the patina is due to age, good storage and having had little use. There was no heavy buildup needing attention. All I did...
It's in good condition :thumbup:
A nice stove and well presented, congratulations :thumbup:
It's in excellent condition, congratulations :mrgreen:
Welcome to CCS @mstewart14 This might be helpful Repacking Coleman Generator #400-5891 @fjfj765 is also a member here.
Edwin, quite often these older stoves have a cork pip in the NRV (Non Return Valve). It doesn't harden with age and when kerosene is added in the...
Nice blue flame :thumbup:
Very nice :thumbup:
A wonderful restoration with an excellent result. Congratulations :thumbup:
Paul, I haven't tried but I can't see why not. It doesn't have to be a neat fit. Using a small "Rat Tail" file with care. Or using your fingers to...
Welcome to CCS @Gilliam Hidden secrets of the Optimus 8R mini-pump cap revealed!
Paul, First check that the fuel can be stopped with the rack removed. If not the taper on the end of the spindle needs attention. Clean the taper...
Nice stove and well presented :thumbup:
@Kasper Gustafsson There is no picture?
A slot 5mm wide by 5mm deep usually works . I find old 1/2" oor 9/16" bolts work well. And wrap some tape near the end to keep the tool centered...
It's in good condition, congratulations :thumbup:
Nice! :thumbup:
Separate names with a comma.
