You may have to fabricate a tool out of a dental pick. Bead stores carry long slender tweezers, these may help with the extraction also. After...
Go to a welding supply shop and pick up a fiberglass welding safety mat. US Air (Radnor) sells it as a "Welding curtain". You probably want their...
In the nine photo spread, the third photo from the left, it shows the tip of one of the burner tubes. Is that tip partially open to allow...
That power supply should do ok, but I would suggest plugging it into a powerstrip that has a breaker installed, instead of relying on your house...
I'll post some pictures after the stove finished it's electrolytic bath. I have the first batch of parts running now.
I managed to open up the hinges slightly and extract the two hinge pins. Not only were they rusty, but glued in place from the paint. I got them...
Thanks
In looking the stove over carefully, I have the feeling that it has a split hinge pin, not a single pin that goes from one side to the other. The...
Has anyone figured out how to remove the hinge pins on the Turm Sport (new model)? I need to check on the condition of the gasket, if any, in the...
Well, I managed to get 99.9% of the red paint off of the stove, revealing the original paint underneath. Acetone was used to remove the paint, as...
Does anyone have clean artwork for the decals on the new model Turm Sport? Thanks.
Thanks for the reminder. In the jewelry trade (my former profession) and in the plating trade, this is known as electrostriping, and is used to...
Cazna, I am not familiar with the adler and austrail 66 stoves. Are there photos of them in the stove reference section?
Thanks for the warm welcomes. Snwcmpr, I am familiar with Tetkoba's work, he has been on my favorites list for a couple of years. I also enjoy...
Hello everyone. This is my first post to this forum, altho I have been lurking for about a year now. I have been making "beer bottle" alcohol...
Separera namn med ett kommatecken.
