Me three. These are amazing stoves. Because the pot support is stainless steel and quality nickel plated founts, they don't show use like other...
Glad you got it up and running. If it's not running on low, pull the gas tip and check the operation of the cleaning/regualating wire. I've had...
Yeah, I think they all burn a bit orange after they're really going. At least mine do. I believe it's trace elements bleeding out of the red hot...
Yup, port on the fuel pickup is probably gunked. Or the F/A rod or spring is stuck, or the whole F/A assembly is loose, or just the fuel tube is...
Depends on what you like. The lower center of gravity is a bonus. Both have leg levelers which work VERY well. Both will burn camp fuel or...
The caps don't seal on these. The seal is on the rim of the pump tube. The two piece cap allows you to take the pump apart if you need to, yet...
The upper and lower caps screw together snug and then act as a single unit. An odd design, but it works. Since it's new and an SMP, it may need...
FWIW, the brass on the burner heads is really soft and can easily be straightened and the dents removed. Mike
I use THIS (best price I've found and they ship FAST) I use it for lots of things, but on burners and grates, it gives a freshly cast look and...
There are so many factors involved in boil times and fuel efficiency. Hard to say. Rarely is a stove at peak efficiency at full power. There...
The red fuel control valve nut is just a retainer, not a packing nut. O-ring seals like this shouldn't be cranked down to tight since it does...
Generator, hell, Doc, you have so many stoves that you may still be on the first tank of fuel too. LOL! On "how to" videos: I can make a stove...
Usually you can simply use the key/wrench to tighten the packing nut at the valve and all is ok. If you're using a pump, it should just take very...
Doc's right, of course. Since those generators aren't straight, they can't be cleaned very effectively or easily. It can be done but is time...
A lot of the information on that site was posted in 2003 and hasn't been updated. Some was updated in 2011. As we all know, kero and Coleman...
Super kit! I'm going to my shop and get started on one like that. Really well made. The only thing missing are the Coleman Chef's Trays that go...
Very nice! That's the same model I saw on Ebay and nearly crapped myself thinking it was a capillary force vaporization stove. Still a very...
OK Ron, you glorious bastard! The holy grail! Happy New Year Indeed! Need the source for the hose. What material etc. I've been looking(ok not...
It's not the oils. It's simply that walnut shells are harder than paint, but won't abrade metal surfaces and only take off the gunk. Aluminum...
Great find! Those originally retailed well over $200 I believe. That quirky connector is very easy to connect and disconnect with gloves or...
Separate names with a comma.
