@Barrett . No need to do that. I am certainly no expert but wish I were.:) Apart from my early cub and scouting days where we used these stoves...
Hello @Barret. I disagree. The fuel cap would normally be fitted to a font that would have the spirit dish sitting on top of the font itself if it...
You sure did.:thumbup:
Hello @Barrett . I agree with you. The stove could be made up from bits from other stoves by the look of it. Refer fuel cap, pot trivet and...
Hello @Garth . A 1950's stove with an older fuel cap by the looks of it. It looks as if it has had a hard life and will require some fixing. It...
What a sweet looking stove! I'm envious.:thumbup::) John
Hello @Barrett and a nice early Optimus you have there. I to was watching that auction and saw that stove but never followed it up....
Hello @AngryDaddyBird. That first flame shot with the star configuration flame looks like it will swirl the flame in an anti-clockwise direction;...
What a rare beauty Ian! Shows that some might still be out there. I wonder about the trivet and how it fits around the burner. It may be possible...
Hello Jerry. Very nice example. I prefer the cork pips. They work well. Put a drip of fine oil into the hole on the underside of the tank cap to...
Hi @Macaroon. Looking at your photos of the burner that you show; is that the "NIB" burner that you have just fitted to your Monitor stove? If so,...
@Macaroon . I wonder if you have a leak at the joint where the burner seal is between the riser, preheating dish and burner. If you have a new...
If you have a small funnel without a filter; I use a 'roll your own' cigarette filter pushed into the funnel to filter suspect fuel. John
Hi @igh371 . I have had a look at your link and can't see the photos you are referring to. I can only see one. Underneath where the other 2 would...
:-kI think that the full area inside the burner cone is needed to get a better air to fuel gas ratio so if the plate is too low in that area, it...
Hello Wim. Possibly cleaning out the inside of the vaporizer(to nearly a shine) with a rolled piece of fine grade wet and dry sand paper, then...
Replacing the wick is a good idea but if the fuel is in anyway contaminated; don't use it or you are only going to have problems again....
Hello @Chris S and welcome. From memory those Kenyon burners have a smaller diameter thread so won't be suitable for fitting to your existing...
You lucky bugger stovie! :) Cheers, John
Another that I have never seen before and what a beauty it is. Being SVEA powered - what a bonus! Cheers, John
Skill mellom flere navn med komma.
