Ok, here are some pics. The slightly stripped down F1 (P1-P4)has no more plastic parts and "my" Brunton stove stand only uses the inner parts of...
Yes. I have used an Ultralight as well, slightly modified. The plastic ring holding the pot supports is the weak point of this stove. I will take...
HJ. There are different versions of the F1. The standard version with steel legs is sufficient and relatively cheap. juergen
We too :lol: As for the gas preference, that's life. And frankly, outside winter/cold temperatures it's not the worst choice. juergen
Yes, it's hot enough. The little space below the jet works as a vaporizing chamber, later on the top of the stove stand gets hot as well. That's...
Acknowledge. Old newsgroup expression ;) Like IMO or IMHO or AFAIR.... juergen
Full ACK. Here in Europe the Snowpeak was hard to get as well... juergen
HJ, the F1 gets really hot. Mounted on a Brunton stove stand you can even work with liquid fuel supply (cartridge upside down) after some time of...
Altering the laws of physics is a really demanding job :) The Soto is a marketing gag, nothing else. I recommend the review of this stove on...
Well, I can't see anything new here. Snowpeak had a similar stove (GigaPower WG) some time ago and then gave it up. The "trick" was to use a...
I saw that once some years ago while completely disassembling a pump. I was just curious :) I then simply used fuel-resistant epoxy. It still...
HJ, you either have version 1 or 2, but in any case one with the old housing and proven CEJN coupling. The difference between version 1 and 2 is...
That depends. If you intend to mainly burn white gas/Coleman fuel then there are better stoves which cost much less. If you are looking for a...
HJ, I know these reviews. You should consider that it's backpackingLIGHT, these guys are butane-oriented, looking for gassies which perform well...
Well, the stove looks good on paper :wink: I tested one in late autumn in Northern Lapland. There is no standard jet but a small hole at the...
It's a bit difficult to determine which one is more efficient. But in my experience silent caps show better (read:complete) combustion behavior. I...
Well, 2nd J.G. at least :) Simmering behavior depends on the right mix of gas/air, velocity and jet size/head design. It takes some testing to...
I usually take photos in the basement, a slightly dark floor. No flash, quiet hand or tripod. That's all. juergen
:) Ok, then you are very close to a BD cap. Now we are waiting to see nice blue flames :wink: Best juergen
Ok, that looks much better now. But since you have cut the tube off flush you should use kind of a baseplate. Otherwise you get a somehow strange...
Skill mellom flere navn med komma.
