probably takes into account that on many (but not all) stoves, the filler port is a short tube that goes down into the fount. If you fill up...
@Bebo I hope someone has seen something similar before because I'm guessing that you need some form of silent burner cap. I'm also curious to...
Thanks John
@presscall I'm glad you clarified that you only slide meta tablets down the inverted handle to top up the fuel and not meths. I'd still be...
It probably won't be working very well if they are. The reduced number of tubes in the burner head mean that there will be less thermal energy...
@Tez alkylate petrol designed for 4 stroke lawnmowers etc such as Aspen 4T or husqvana's equivalent is essentially the same as coleman fuel...
Thanks for the reply Shinzo-san. If you have the correct nipple and the seals are all OK I'm not sure what else you can do. I hope that you can...
@gkpllantern do you know if you have the correct nipple / jet installed. Different internal diameters are needed for alcohol stoves compared...
Thanks Tony
That's one way to eliminate number 1 (the minimum that 2 dice could give is 2 ) and double six would leave you just as confused because there are...
@Blackdog I just remembered seeing a post on here a few years back but couldn't find it this morning. Turns out I had remembered seeing a post by...
@Tony Press novel use of an outer burner cap to support the regulated burner assembly but what is that pot stand? Not sure that I have use for...
@Jack Ryan once you have re-painted it try using a thin sheet of aluminium under the burner to protect it from the heat reflected from the...
As @hikerduane said, you need to let the priming fuel burn out completely then hold a lit match / lighter next to the holes in the outer burner...
not good for stealth camping then!
@Jimg The flame spreader plate is an essential part of the thermal feedback loop that maintains sufficient heat around the jet / control valve to...
Thanks @Remus1956 I might give it a try some day. Regards John
Does anyone know what the original chimney on the Taykit stoves was made of? The one on my Stesco is steel I believe and I'm wondering if...
@Yannick Michel I think I would try to use the copper gasket as a template for making a lead washer. As stated above lead is usually pretty soft....
Hi Jack, welcome to CCS. There are numerous threads on here about how to clean brass stoves and what not to do. There are also many debates...
Separate names with a comma.
