"I used a double boiler to steam artichokes (45 min.). I use a bain-marie to cook ramekins of creme brulee in the oven. At least that's my...
Slightly tangential, but @snwcmpr 's "Stumbling grumbling mumbling fumbling are keys to the start of issues on any trips." comment struck a chord....
Just a follow-up, the two 20-28 gauge bore brushes I ordered were too large in diameter, I could not force them in. I ended up with three .50...
Mine had a Svea 123.
This just popped up on my Facebook feed. Anyone that reads much marine adventure will recognize John Guzzwell and Trekka. Some issues with...
Thanks, I saw yours (or a similar post) when doing research. I went ahead & ordered a pair of 20 ga. brass bore brushes. I figured I would...
It looks like the bore brushes available online are pretty short, and have a threaded end. Do you leave it intact & push it in? Thanks....
A friend picked up this galvanized Punker for me quite cheaply on FB marketplace. It was advertised as working, and it does after a fashion but...
Your office is a lot nicer than mine.
@Desmond Griswold can you send a picture of the missing part (presumably a picture from the instructions or pulled from the web)? I have a...
The longer I used it teh better it got, which makes me think even more it needs cleaning. @gieorgijewski I saw your earlier post. I would be...
Picked up this galvanized Punker one-burner marine stove locally for a good price. It was advertised as "working", and it does but surges badly....
Well, it made 4 rounds of coffee, 2 pots of oatmeal, and a cup of hot chocolate so I am going to assume the crack was just my poor eye sight...
I finally managed to get it put together without cutting it. And after some fiddling, it passed a dunk test. I plan to use it to make breakfast...
I think not, bot that's what I am trying to accomplish by putting it back together & re-dunk testing it.
So as a follow up to this, I had stripped this stove down to bare parts and used a few to fix a partial Taiwanese 123R-clone stove I found. Based...
I was waiting for someone to say it.
I picked up a partial Pak Cook 235 since my original post, and the parts are all identical except the Pak-Cook has markings on the tank. I am...
I will pull out the parts & look again. In real life (rather than the photo) it sure appeared to be a crack but I agree in the picture it does...
I ran into another problem on my 123R clone labeled Champion (original post here Removing the SRV on a Taiwanese Svea 123R clone?). The third...
Separate names with a comma.
