this is why a separate tank and burner is in fact the safest design setup for a liquid fuel burner. and I would make it law to use solid fuel line...
definitely not worth risking it... take it from someone burnt by liquid fuel (gasoline...) make it look nice "like new" just for show.
@Blackdog scale inside the kettle is normal since we boil water in it. so a lot of minerals stay while almost pure H2O evaporates away while...
@Tony Press do you have a picture of the bottom? that will tell how much it's been used! if it isn't new!
@Blackdog what is that "classic old english design"? do you have a picture? is it covered in enamel for protection against rust?
@Tony Press nice one. cast iron "cooking stuff" must be oiled up well with sunflower oil then burned about 1-2 hours in open place(lots of smoke)...
@Andrey Sevastopol can you tell me, if you know from experience if silent caps reduce the burner heating output in kw? I haven't tried both but...
lye dissolves your skin.then you feel it ,like a burn. but it's similar to sulphuric acid ,that dehydrates the flesh.different way but same...
@Alex H 30 kw on pump? :-) I can't help it: [MEDIA]
you don't cook in an unventilated tent. unless you want to die by carbon monoxide or burn to death. any flame needs a certain space/area to...
@Kristoffer Sundt Sandnes that burner is 3 months older than me. was it used often? or just once every decade?
carefull Remus. once you start buying stoves you might not ever stop... I noticed that too, with stoves plus another "hobby" I won't mention...
at least yours is more "fancy" copper and brass :-)
@Remus1956 you can still find new old stock. various sites, places/countries in good condition. here's one from Romania. shown price is about 100...
yeah, why not solid metal lines? even a 5 mm steel brake line is not something to consider "expensive". flare and removable would surely increase...
might as well go for a full pressurised oil stove :-) 20 kw at least . should be "enough" [ATTACH]
@mlkimmel92 smart wind protection for the burner head+ valve. AND an infrared radiation protection for the fuel tank. can also act as a...
heat and quench IS a "practice" when it comes to cleaning burner heads?! I quenched bearing steel 52100 in cold water from about 800 degrees...
best cleaning is in ultrasonic bath
my shmel-2 did that too. it's either the fuel to blame or a dosage problem,yellow flame means too much fuel.more fuel than oxygen to obtain a...
Separate names with a comma.
