Need help with ID of stove

Discussion in 'Stove Forum' started by Whippet, Jan 10, 2005.

  1. Whippet

    Offline
    Joined:
    Dec 27, 2004
    Messages:
    8
    Need help on the model. I know it is a Primus with some Arabic writing. Serial number(on the neck) puts it in the mid-60s. Won't hold pressure(leather seal is tore. Just learning how to work it. Need to know where to get a new seal, and any help with correct way to run it.I will try to post a pic, but don't know if I can.
     
    Whippet, Jan 10, 2005
    #1

  2. Whippet

    Offline
    Joined:
    Dec 27, 2004
    Messages:
    8
    I know it liioks like a primus #1. If that helps. Cant figure out how to post the pic
     
    Whippet, Jan 10, 2005
    #2
  3. CWilkins

    CWilkins Subscriber

    Offline
    Joined:
    Jul 28, 2004
    Messages:
    1,304
    Hi,
    Lets start with the leather. Are you referring to the leather on the pump? If so I can give you a member here who makes them to order. (very reasonable).

    To post a pic you need a place for it to be stored. Either a website or photbucket, webshots etc. Then link it to your post with the Img button.
    Press the button once and (|imgRemoved|) will appear

    Chuck
     
    CWilkins, Jan 12, 2005
    #3