Sigg Tourist

Discussion in 'Stove Forum' started by installer, Dec 23, 2011.

  1. installer

    Offline
    Joined:
    Nov 8, 2010
    Messages:
    29
    I have finally managed to get a Sigg Tourist cookset to go with my Svea 123/R.

    However I believe there should be a means of securing the stove in the bottom windshield, all I have in the bottom of mine is two pop-rivets.

    I'm sure I could construct something. but I want to make it as near to original as possible.

    Could any one help?
     
    Last edited by a moderator: Jun 27, 2015
    installer, Dec 23, 2011
    #1

  2. Michael1965

    Offline
    Joined:
    Jul 7, 2011
    Messages:
    140
    Location:
    Iowa
    Hello,

    Just had a look at my Sigg Toursist for the Svea, and here is what mine has to hold the stove in place:

    1324676275-IMG_0653.JPG

    1324676295-IMG_0652.JPG

    They are small aluminum washers with a poprivet holding them in place. The edge of the stove slides under the washer.

    Best regards,

    Mike.
     
    Last edited by a moderator: Jun 26, 2015
    Michael1965, Dec 23, 2011
    #2

  3. installer

    Offline
    Joined:
    Nov 8, 2010
    Messages:
    29
    Many thanks Mike, all I have left on mine are the pop-rivets and no washers.

    Still it looks like it will be easy to reinstate the washers.

    Best Regards

    Mike Buckley (Installer)
     
    installer, Dec 23, 2011
    #3

  4. Martyn_s30v

    Offline
    Joined:
    Dec 15, 2011
    Messages:
    27
    Yep, it's just a couple of washers held in place with rivets. Here's mine....

    sigg012.jpg

    Awesome kit.

    sigg005.jpg

    sigg007.jpg

    sigg009.jpg

    Mine is a hybrid, it has the base and windshield from a SVEA 123 set, with a stainless steel pan set which was made to go with the Coleman stove.
     
    Martyn_s30v, Dec 30, 2011
    #4